
Fast delivery
Get in as fast as 1 hour

It’s all local
Shop your favorites

Direct chat
Connect with shoppers
About
Details
A strong structural adhesive formulated for bonding similar or dissimilar materials as well as unprepared metals. Resists weathering, high humidity, and temperature variations. Cured adhesive can be drilled, sanded and painted.
Bonds: ABS, acrylic, aluminum, glass, PVC, hard and semi-flexible plastic, fiberglass, styrene, and vinyl.
Directions
Directions: 1. For best results: Roughen, remove any grease or oil, clean, and dry surfaces to be joined or repaired. 2. Remove plastic mixing paddle from center of black plunger. Turn nozzle end up and pull plunger back slightly (1/8 in). Allow air bubbles to rise to top. Snap off and save storage cap. 3. Push plunger evenly to dispense equal amounts of hardener and resin onto a discardable surface such as a piece of cardboard or the plastic container on the front of this package. Pull back plunger to stop flow. 4. Mix thoroughly with paddle provided. 5. Apply to surfaces to be joined or repaired. Adhesive starts to set in 5 minutes and reaches usable strength in 4 hours. Wipe nozzle clean. Replace cap for storage. Note: Not recommended for use on polyethylene plastics. Temperature rage: -60F to 250F (-51C to 112C).
Warnings
Flammable. Contains Methyl Methacrylate, Chlorosulfonated Polyethylene, Methacrylic Acid. Do not use in the presence of heat, sparks, or open flame. Keep container closed when not in use. Avoid contact with eyes and prolonged contact with skin. Wear gloves while using. Do not breathe vapors. For eye contact, flush with water for 15 minutes; call a physician. For skin contact, wash thoroughly with soap and water. If swallowed, do not induce vomiting; call a physician. See Safety Data Sheet for complete GHS hazard communication. Keep out of the reach of children. This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
About
Details
A strong structural adhesive formulated for bonding similar or dissimilar materials as well as unprepared metals. Resists weathering, high humidity, and temperature variations. Cured adhesive can be drilled, sanded and painted.
Bonds: ABS, acrylic, aluminum, glass, PVC, hard and semi-flexible plastic, fiberglass, styrene, and vinyl.
Directions
Directions: 1. For best results: Roughen, remove any grease or oil, clean, and dry surfaces to be joined or repaired. 2. Remove plastic mixing paddle from center of black plunger. Turn nozzle end up and pull plunger back slightly (1/8 in). Allow air bubbles to rise to top. Snap off and save storage cap. 3. Push plunger evenly to dispense equal amounts of hardener and resin onto a discardable surface such as a piece of cardboard or the plastic container on the front of this package. Pull back plunger to stop flow. 4. Mix thoroughly with paddle provided. 5. Apply to surfaces to be joined or repaired. Adhesive starts to set in 5 minutes and reaches usable strength in 4 hours. Wipe nozzle clean. Replace cap for storage. Note: Not recommended for use on polyethylene plastics. Temperature rage: -60F to 250F (-51C to 112C).
Warnings
Flammable. Contains Methyl Methacrylate, Chlorosulfonated Polyethylene, Methacrylic Acid. Do not use in the presence of heat, sparks, or open flame. Keep container closed when not in use. Avoid contact with eyes and prolonged contact with skin. Wear gloves while using. Do not breathe vapors. For eye contact, flush with water for 15 minutes; call a physician. For skin contact, wash thoroughly with soap and water. If swallowed, do not induce vomiting; call a physician. See Safety Data Sheet for complete GHS hazard communication. Keep out of the reach of children. This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.
Common questions
Learn more about how to place an order here.
Then, when you arrive at the store of your choice, use the Instacart app to notify us. Depending on the store, a shopper or store employee will bring the groceries to your car, or you can pick them up at the designated area.
Learn more about pickup orders here.
- Delivery fees start at $3.99 for same-day orders over $35. Fees vary for one-hour deliveries, club store deliveries, and deliveries under $35.
- Service fees vary and are subject to change based on factors like location and the number and types of items in your cart. Orders containing alcohol have a separate service fee.
- Tipping is optional but encouraged for delivery orders. It's a great way to show your shopper appreciation and recognition for excellent service. 100% of your tip goes directly to the shopper who delivers your order.
With an optional Instacart+ membership, you can get $0 delivery fee on every order over $35 and lower service fees too.
Instacart pickup cost:
- There may be a "pickup fee" (equivalent to a delivery fee for pickup orders) on your pick up order that is typically $1.99 for non-Instacart+ members. Instacart+ membership waives this like it would a delivery fee.
- Pick up orders have no service fees, regardless of non-Instacart+ or Instacart+ membership.
Learn more about Instacart pricing here.
You can set item and delivery instructions in advance, as well as chat directly with your shopper while they shop and deliver your items. You can tell the shopper to:
- Find Best Match: By default, your shopper will use their best judgement to pick a replacement for your item.
- Pick Specific Replacement: You can pick a specific alternative for the shopper to purchase if your first choice is out-of-stock.
- Don't Replace: For items you'd rather not replace, choose "Don't replace" to get a refund if the item is out of stock.
Learn more about instructions for specific items or replacements here.
- Missing items
- Incorrect items
- Damaged items
- Poor replacements
- Early/late orders
If an order never came, or you get someone else's order, you can reach out to Instacart Customer Experience.