
Fast delivery
Get in as fast as 1 hour

It’s all local
Shop your favorites

Direct chat
Connect with shoppers
Flex Seal Sealant, Liquid, Rubber, Coating
Flex Seal Sealant, Liquid, Rubber, Coating
32 fl ozAbout
Ingredients
Contains: Butan-2-One O, O', O - (Methylsilylidyne) Trioxime, Aminoprophytriethoxysilane Voc Content: 55 g/L (0.46 Ib/Gal).
Directions
Directions: Surface must be clean, dry and free of grease, oil and dirt. Increase adhesion by etching surface with sand paper. Brush, roll, dip or pour directly onto surface. Coat entire surface until all cracks and holes are completely Apply additional coats as needed to increase thickness and to fill larger holes. Allow each coat to dry completely before adding additional coats Allow 24 to 48 hours or more to dry. Covers up to 37.5 Square Feet.
Warnings
Warning: This product can expose to you toluene, which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov., First Aid: Skin contact: rinse skin thoroughly with water for at least 15 minutes. Get medical attention promptly if symptons persist or occur after washing. Eye contact: immediately flush with plenty of water for at least 15 minutes. Get medical attention promptly if symptoms occur after washing., Waring: May cause skin for eye irritation. Read other cautions on (Back side) panel. All cracks and holes must be completely filled and dry before testing product. If the treated area is wet or very soft, it will need more time to cure. Clean up: wet flex seal liquid can be easily cleaned with a dry cloth or paper towel. Brushes and rollers can be cleaned with mineral spirits. Do not clean with water. Not intended for professional roofers or underfoot applications points and other topcoats will not adhere to product. Avoid contact with skin and eyes. May produce allergic reaction by skin contact. Keep out of reach of children. Ingestion: Call a poison control center or doctor immediately.
About
Ingredients
Contains: Butan-2-One O, O', O - (Methylsilylidyne) Trioxime, Aminoprophytriethoxysilane Voc Content: 55 g/L (0.46 Ib/Gal).
Directions
Directions: Surface must be clean, dry and free of grease, oil and dirt. Increase adhesion by etching surface with sand paper. Brush, roll, dip or pour directly onto surface. Coat entire surface until all cracks and holes are completely Apply additional coats as needed to increase thickness and to fill larger holes. Allow each coat to dry completely before adding additional coats Allow 24 to 48 hours or more to dry. Covers up to 37.5 Square Feet.
Warnings
Warning: This product can expose to you toluene, which is known to the state of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov., First Aid: Skin contact: rinse skin thoroughly with water for at least 15 minutes. Get medical attention promptly if symptons persist or occur after washing. Eye contact: immediately flush with plenty of water for at least 15 minutes. Get medical attention promptly if symptoms occur after washing., Waring: May cause skin for eye irritation. Read other cautions on (Back side) panel. All cracks and holes must be completely filled and dry before testing product. If the treated area is wet or very soft, it will need more time to cure. Clean up: wet flex seal liquid can be easily cleaned with a dry cloth or paper towel. Brushes and rollers can be cleaned with mineral spirits. Do not clean with water. Not intended for professional roofers or underfoot applications points and other topcoats will not adhere to product. Avoid contact with skin and eyes. May produce allergic reaction by skin contact. Keep out of reach of children. Ingestion: Call a poison control center or doctor immediately.
Common questions
Learn more about how to place an order here.
Then, when you arrive at the store of your choice, use the Instacart app to notify us. Depending on the store, a shopper or store employee will bring the groceries to your car, or you can pick them up at the designated area.
Learn more about pickup orders here.
- Delivery fees start at $3.99 for same-day orders over $35. Fees vary for one-hour deliveries, club store deliveries, and deliveries under $35.
- Service fees vary and are subject to change based on factors like location and the number and types of items in your cart. Orders containing alcohol have a separate service fee.
- Tipping is optional but encouraged for delivery orders. It's a great way to show your shopper appreciation and recognition for excellent service. 100% of your tip goes directly to the shopper who delivers your order.
With an optional Instacart+ membership, you can get $0 delivery fee on every order over $35 and lower service fees too.
Instacart pickup cost:
- There may be a "pickup fee" (equivalent to a delivery fee for pickup orders) on your pick up order that is typically $1.99 for non-Instacart+ members. Instacart+ membership waives this like it would a delivery fee.
- Pick up orders have no service fees, regardless of non-Instacart+ or Instacart+ membership.
Learn more about Instacart pricing here.
You can set item and delivery instructions in advance, as well as chat directly with your shopper while they shop and deliver your items. You can tell the shopper to:
- Find Best Match: By default, your shopper will use their best judgement to pick a replacement for your item.
- Pick Specific Replacement: You can pick a specific alternative for the shopper to purchase if your first choice is out-of-stock.
- Don't Replace: For items you'd rather not replace, choose "Don't replace" to get a refund if the item is out of stock.
Learn more about instructions for specific items or replacements here.
- Missing items
- Incorrect items
- Damaged items
- Poor replacements
- Early/late orders
If an order never came, or you get someone else's order, you can reach out to Instacart Customer Experience.