
Fast delivery
Get in as fast as 1 hour

It’s all local
Shop your favorites

Direct chat
Connect with shoppers
About
Details
Magnesium 1/2 inches NPT for atwood water heaters. RV water heater anode rod 4.5 inch long with 1/2 inch pipe thread. Extend the life of your RV’s water heater with Camco’s patented magnesium anode rod for aluminum water heaters (Atwood style). Camco’s RV water heater anode rod preserves the life of your water heater by corroding itself so your water heater tank doesn’t. Simply replace your 1/2 inch pipe thread drain plug with the Camco RV water heater anode rod to protect your tank.
Directions
Installation Instructions: (1) Turn the water heater’s gas regulator to the OFF position. (2) Allow water in the heater tank to cool, or open a hot water faucet inside the RV until water temperature is cool. (3) Turn off the water supply. (4) Open a hot water faucet or T & P valve to release line pressure. (5) Remove the drain plug of the water heater tank. Older models may have a square head drain plug. (6) Apply teflon tape to Camco’s RV anode rod. Wrap 3 to 5 layers only in the same direction that you tighten the rod. (7) Insert anode rod and tighten until snug. Use caution. Do not overtighten. Use only 7-8 ft-lbs torque. (8) Turn on water supply to RV. While filling the hot water heater, open the hot water faucets inside the RV. Allow water to run until all air is forced from water lines, then close the faucets. Water heater should now be full. (9) Examine the RV anode rod for leaks and tighten if necessary. Camco recommends inspecting your anode rod monthly. Over time, minerals can build up around the drain plug opening making removal of your anode rod difficult, and frequent inspection will help prevent this. For maximum performance, replace your RV anode rod when less than one half of the rod remains.
About
Details
Magnesium 1/2 inches NPT for atwood water heaters. RV water heater anode rod 4.5 inch long with 1/2 inch pipe thread. Extend the life of your RV’s water heater with Camco’s patented magnesium anode rod for aluminum water heaters (Atwood style). Camco’s RV water heater anode rod preserves the life of your water heater by corroding itself so your water heater tank doesn’t. Simply replace your 1/2 inch pipe thread drain plug with the Camco RV water heater anode rod to protect your tank.
Directions
Installation Instructions: (1) Turn the water heater’s gas regulator to the OFF position. (2) Allow water in the heater tank to cool, or open a hot water faucet inside the RV until water temperature is cool. (3) Turn off the water supply. (4) Open a hot water faucet or T & P valve to release line pressure. (5) Remove the drain plug of the water heater tank. Older models may have a square head drain plug. (6) Apply teflon tape to Camco’s RV anode rod. Wrap 3 to 5 layers only in the same direction that you tighten the rod. (7) Insert anode rod and tighten until snug. Use caution. Do not overtighten. Use only 7-8 ft-lbs torque. (8) Turn on water supply to RV. While filling the hot water heater, open the hot water faucets inside the RV. Allow water to run until all air is forced from water lines, then close the faucets. Water heater should now be full. (9) Examine the RV anode rod for leaks and tighten if necessary. Camco recommends inspecting your anode rod monthly. Over time, minerals can build up around the drain plug opening making removal of your anode rod difficult, and frequent inspection will help prevent this. For maximum performance, replace your RV anode rod when less than one half of the rod remains.
Common questions
Learn more about how to place an order here.
Then, when you arrive at the store of your choice, use the Instacart app to notify us. Depending on the store, a shopper or store employee will bring the groceries to your car, or you can pick them up at the designated area.
Learn more about pickup orders here.
- Delivery fees start at $3.99 for same-day orders over $35. Fees vary for one-hour deliveries, club store deliveries, and deliveries under $35.
- Service fees vary and are subject to change based on factors like location and the number and types of items in your cart. Orders containing alcohol have a separate service fee.
- Tipping is optional but encouraged for delivery orders. It's a great way to show your shopper appreciation and recognition for excellent service. 100% of your tip goes directly to the shopper who delivers your order.
With an optional Instacart+ membership, you can get $0 delivery fee on every order over $35 and lower service fees too.
Instacart pickup cost:
- There may be a "pickup fee" (equivalent to a delivery fee for pickup orders) on your pick up order that is typically $1.99 for non-Instacart+ members. Instacart+ membership waives this like it would a delivery fee.
- Pick up orders have no service fees, regardless of non-Instacart+ or Instacart+ membership.
Learn more about Instacart pricing here.
You can set item and delivery instructions in advance, as well as chat directly with your shopper while they shop and deliver your items. You can tell the shopper to:
- Find Best Match: By default, your shopper will use their best judgement to pick a replacement for your item.
- Pick Specific Replacement: You can pick a specific alternative for the shopper to purchase if your first choice is out-of-stock.
- Don't Replace: For items you'd rather not replace, choose "Don't replace" to get a refund if the item is out of stock.
Learn more about instructions for specific items or replacements here.
- Missing items
- Incorrect items
- Damaged items
- Poor replacements
- Early/late orders
If an order never came, or you get someone else's order, you can reach out to Instacart Customer Experience.