Directions

Operating Instructions: 1. Start with hair that is completely dried and detangled before using Le Pirouette. 2. The lights on the tool will each flash once when it is first/initially plugged into the electrical outlet (the tool has not started heating). 3. To heat Le Pirouette, press the button for 3 seconds and a white light will blink above the default temperature of 330 degrees F until it reaches temperature. 4. To select a different temperature, quickly press and release the button until the light next to your desired temperature begins blinking. 5. Once the tool has reached temperature, the white light will become solid above its current temperature. 6. Apply your L'ange heat protectant of choice. 7. Press the thumb rest to open the clip. 8. Starting 1-2 inches from your ends, insert a 0.5-1 inch section of hair (for best results, insert hair into the middle of the clamp). 9. Press the or button to auto rotate the barrel in your preferred direction. 10. Once the strand is wrapped, hold for approximately 5-10 seconds. 11. Press the thumb rest to allow the curl to slide out from around the barrel. 12. Allow the curl to cool in the palm of your hand. 13. Press the circular home button to return the clamp back to center. 14. Repeat all over until the desired style is achieved. 15. Apply your finishing spray of choice and tousle to separate. 16. Once you're finished styling, press and hold button for 3 seconds to turn tool off. All lights will turn off. 17. Unplug Le Pirouette and wait until completely cooled before storing away.